Vocals Too Quiet in FL Studio? Here's the Fix
Share
Vocals Too Quiet in FL Studio? Here's the Fix
5 min read · Mixing Tips
Your vocal disappears in the mix or sounds too quiet in FL Studio — this is a very common problem. This guide covers the causes and fixes so your vocal cuts through every time.
A quiet vocal in FL Studio is almost always a gain staging problem. Fix that first, then worry about plugins.
— nameonthebeat.com1 Check your gain staging
Gain staging is the foundation of a good mix in FL Studio.
- Check the level of your vocal in the Mixer — is the meter too low?
- Use Fruity Balance or the Mixer fader to raise the level
- Aim for a level of -18 dB to -12 dB before processing
2 Add compression with Maximus
Maximus is FL Studio's powerful multiband compressor.
- Add Maximus to your vocal track
- Use the "Vocal" preset as a starting point
- Raise the output gain to compensate for the volume loss
3 Boost presence with Parametric EQ 2
The right EQ boost makes your vocal audible without raising the volume.
- Boost around 3-5 kHz for presence
- Boost around 10 kHz for brightness and air
- Cut lows below 100 Hz
Did you know?
In FL Studio the Mixer master fader defaults to 80%. Set it to 100% for more headroom and a louder final result without clipping.
4 Add subtle saturation for body
Saturation adds harmonics that make your vocal thicker and more present.
- Use Fruity Blood Overdrive with a very low drive setting
- Keep it subtle — warmth, not distortion
Fastest fix: our vocal preset bundles are tuned for a powerful, present vocal sound in FL Studio — ready to use instantly.
Vocals that cut through the mix
Our vocal preset bundles are designed for a powerful, present sound in FL Studio.
Download Vocal Presets
