How to Record and Mix Vocals in Logic Pro 13: Set Up Your Vocal Chain

Logic Pro 13 has been on the Mac App Store since November 5, 2026. Just updated and want to get back to recording? Then you mostly want to know where your presets went, what the new assistant can do for your vocal track and how your chain should look now. That's what this guide covers, step by step.

Everything below about version 13.0 comes from Apple's release notes. Anything we couldn't confirm there, we left out.

1. Do a quick check after updating

Open an existing project and make sure your vocal tracks still sound the way you're used to. Logic Pro 13 has a new browser, and your own saved patches live under Your Patches in its sidebar. Switch the browser to column view and you'll see the same folder structure as in Finder. That's the fastest way to check that all your own vocal presets are still there.

According to Apple, Logic Pro needs macOS 26.1 or later and a Mac with Apple silicon. Read our Logic Pro 13 news article for everything else the update requires.

2. Set up a vocal track with the assistant

The new assistant (beta) understands plain language. Open it with the Assistant button in the control bar or choose View > Show Assistant. Apple's own examples fit a vocal session perfectly:

  • "Rename the selected track to Lead Vocal."
  • "Add a compressor to the vocal track."
  • "Record-enable the vocal track and turn on input monitoring."
  • "Load a large hall preset on the reverb."

Keep in mind the assistant only works in English for now. You also need an Apple Creator Studio subscription, a Mac with Apple silicon and macOS 27 or later. The conversation is saved with your project on your Mac, but it doesn't travel with the project when you share it.

Useful if you record with a single-channel mic: the input menu on an audio channel strip now lists both mono and stereo inputs. Pick a mono input and Logic switches the channel format to match. That way you won't record your voice in stereo by accident.

The assistant sets up your track, but you still build the sound yourself. That's where the next part comes in.

3. Your vocal chain with stock plugins

You don't need extra plugins to get a vocal that sits tight on the beat. Logic's stock plugins take you a long way, as long as the order is right. A chain a lot of rappers and singers start with:

  1. Pitch Correction first, so everything after it works with a steady pitch. Subtle for singing, harder if you want that tight effect.
  2. Channel EQ to clean up: cut the mud in the low end and pull back any spot that sounds boxy or nasal. New in Logic Pro 13: Channel EQ now uses Proportional Gain-Q coupling by default, so a band gets narrower the more you boost or cut it. Big cuts feel less heavy-handed that way.
  3. Compressor to even out your voice, so quiet words don't get lost and loud lines don't jump out.
  4. DeEsser 2 for harsh s and t sounds, which often stand out more after compression.
  5. A second Channel EQ for tone: a bit more air or warmth, depending on your voice and the beat.
  6. ChromaVerb and Tape Delay on sends, not directly on your vocal. That keeps your dry voice clear and lets you control the space with one fader.

Exact settings depend on your voice, your mic and the beat, so always listen in the mix, not soloed. We explain why this order works in Logic Pro vocal chain: the perfect plugin order.

Don't want to start from scratch? A vocal preset loads a complete chain on your track in one go, and then you tune it to your own voice.

Vocal presets for Logic Pro

Load a preset on your vocal track and you have a full chain to start from. Built with Logic's stock plugins, so you don't need any extra plugins.

See all vocal presets

4. Loading and saving presets in the new browser

The new browser brings the Logic Pro Sound Library, your own samples and patches, and plugin presets together in one place. For vocals, these are the most useful things to know:

  • A preset for one plugin: click the Browser Focus triangle next to a plugin slot. The browser opens right on the presets for that slot.
  • A full channel strip: the Setting button on the inspector channel strip opens the browser on your patches.
  • Loading: press Return to add the selected patch on a new track, or Command-Return to load it on the selected track. You want the second one when your vocal is already recorded.
  • Saving your own chain: save a track as a patch from the browser or from the track header context menu. It then shows up under Your Patches.

Not sure how to get a preset you bought or made into Logic? Read how to load channel strip presets in Logic Pro.

5. Stem Splitter: practice on your own demo

Stem Splitter could already pull vocals, drums, bass and other parts out of an audio file. That comes in handy when all that's left of an old demo is the bounce: pull out your own vocal, keep it low as a guide and record your part again. New in 13.0 is the Individual Kit Pieces option, which splits the drums into kick, snare, hi-hat, toms, cymbals and other percussion. So you could turn the hi-hats down a little if they clash with your vocal. Also new: stems now take the gain of the original region into account.

6. Recording is still the foundation

No assistant or preset can save a bad recording. Record in a quiet room, keep the same distance from your mic and make sure your peaks don't clip. A preset works best on a clean, dry take. Not sure where to start? The step-by-step plan for recording your first vocal in Logic Pro helps you get going.

Curious what else is in the update, from the new look to the Play Surface? Read our Logic Pro 13 news article.

Source: Apple, Logic Pro for Mac 13.0 release notes (November 5, 2026).

Back to blog